Ajoutez $5,000.00 plus pour une livraison GRATUITE !
Or, feel free to ask for a feature!
AQUASTOP E96 FAST is a 2:1, 100% solids, zero VOC, two-component epoxy primer based on phenolic amine chemistry. It is specifically designed as a moisture barrier for concrete floors with high residual moisture before installing floor coverings, coatings, or parquet (up to 25 lbs/1000 ft²/24 hr). This primer is also effective on calcium sulfate-based screeds with slightly higher residual moisture and can be used on absorbent, non-absorbent, and smooth surfaces, both indoors and outdoors. Ground-level concrete slabs emit invisible moisture vapor. The acceptable moisture emissions for concrete are 3 lbs/1000 ft² over 24 hours (<4%) based on a calcium chloride test. Additionally, a relative humidity (RH) test can measure moisture vapor; RH test results should be below 85% per ASTM F2170. Exceeding this humidity level can lead to blistering and delamination of coatings. Conducting a calcium chloride or relative humidity test helps determine concrete moisture levels. If RH test levels exceed 85% or calcium chloride levels are over 3 lbs, the AQUASTOP Fast concrete moisture vapor control system should be applied before the coating system
ADVANTAGES
• Made from 100% solids
• Resistant to chemical loadings
• Good penetration
• Can be applied to almost all substrates
• Grip promoting
• Suitable for application on subfloor heating systems
• Resistant to bacteria and moisture
USES
•Concrete Surfaces
•Decorative Chips/Flakes
•Decorative Quartz
• Metallic Coating System
•High/Thin Build Systems
•Mortars
•Cementitious Overlays
•Polymeric Flooring
TECHNICAL DATA SHEET SDS PART A SDS PART B
AQUASTOP E96 FAST (2H) -Moisture Barrier Epoxy -3 GAL